LanParty X58-T3EH6 User Manual page 93

CPU VID Control
This field allows you to manually adjust to a higher core voltage that
is supplied to the CPU. If you want to use the CPU's default core
voltage, leave this field in its default setting. The CPU's Vcore will be
generated according to the CPU VID configuration.
Important:
Although this function is supported, we do not recommend
that you use a higher voltage because unstable current may
be supplied to the system board causing damage.
Vcore Droop(Loadline) Scale
The options are 50%, 75% and 100%.
Vcore Mode
The options are Ignore VID and Watch VID.
Vcore Auto PSI
The options are Enabled and Disabled.
OCP
This field is used to configure the OCP.
DRAM Bus Voltage
The options are 1.455V to
DRAM PWM Switch Frequency
The options are Nominal Frequency, Reduce 15%, Reduce 30%,
Increase 15% and Increase 30%.
DRAM PWM Phase Control
The options are 2 Phase Operation and 1 Phase Operation.
CPU VTT Special Add
The options are Auto, +0.0125V to +0.1875V.
2.400V.
3
BIOS Setup
9 3