System Memory - LanParty X58-T3EH6 User Manual

2
Hardware Installation
Warning:
.
.
.
.
.
.
.
.
Electrostatic discharge (ESD) can damage your system board, proces-
sor, disk drives, add-in boards, and other components. Perform the
upgrade instruction procedures described at an ESD workstation only.
If such a station is not available, you can provide some ESD protec-
tion by wearing an antistatic wrist strap and attaching it to a metal
part of the system chassis. If a wrist strap is unavailable, establish
and maintain contact with the system chassis throughout any proce-
dures requiring ESD protection.

System Memory

Warning:
. .
.
.
.
.
.
.
When the DRAM Power LED lit red, it indicates that power is
present on the DIMM sockets. Power-off the PC then unplug the
power cord prior to installing any memory modules. Failure to do so
will cause severe damage to the motherboard and components.
Channel A
Channel B
Channel C
The 6 DIMM sockets on the system board are divided into 3
channels:
16
DIMM 1
DIMM 2
DIMM 3
DIMM 4
DIMM 5
DIMM 6
Channel A - DIMM 1 and DIMM 2
Channel B - DIMM 3 and DIMM 4
Channel C - DIMM 5 and DIMM 6
DRAM
Power LED
1