LanParty X58-T3EH6 User Manual page 79

Resume By Alarm
Enabled
Disabled
Date (of Month) Alarm
0
1-31
Time (hh:mm:ss) of Alarm
This is used to set the time you would like the system to power-on.
Reload Global Timer Events
When enabled, access to the specified field (Primary IDE 0/1,
Secondary IDE 0/1, FDD/COM/LPT Port, PCI PIRQ[A-D]#) will
cause the system to wake up completely from the power
management mode. When disabled, the system will not wake up
from the power management mode despite access to the specified
field.
HPET Support
This field is used to enable or disable HPET.
HPET Mode
The options are 32-bit mode and 64-bit mode.
When Enabled, you can set the time you would like
the Soft Power Down (Soft-Off) PC to power-on in
the "Time (dd:hh:mm) of Alarm" field. However, if the
system is being accessed by incoming calls or the
network prior to the time set in the field, the system
will give priority to the incoming calls or network.
Disables the automatic power-on function. (default).
The system will power-on everyday according to the
time set in the "Time (hh:mm:ss) Alarm" field.
Select a date you would like the system to power-
on. The system will power-on on the set date, and
time set in the "Time (hh:mm:ss) Alarm" field.
3
BIOS Setup
7 9