6. Align the SLI bridge above the SLI connector of the graphics
cards then insert the bridge until it is properly seated in place.
7.
Connect auxiliary power source from the power supply unit to
the graphics cards.
8.
Connect a display device's VGA or DVI cable to the graphics
card.
9.
Make sure you have installed the nVidia GForce 8 Series
Drivers. Refer to chapter 4 of this manual for more information.
10. Install the graphics cards' drivers. Refer to the user's manual or
documentation that came with the graphics cards for
instructions on installing the drivers.
11. After restarting the system, right-click on the Windows desktop
then select NVIDIA Control Panel.
12. Follow the remainder of the steps shown on the screen to
enable and configure SLI.
Note:
• Visit ATI and NVIDIA websites for the latest certified graphics cards.
SLI bridge
Multiple GPUs
6
143