Raid Bios - LanParty X58-T3EH6 User Manual

RAID BIOS

Intel RAID BIOS
The Intel RAID BIOS utility is used to configure and manage RAID
on Serial ATA drives connected to SATA 1 to SATA 6.
When the system powers-up and all drives have been detected, the
Intel RAID BIOS status message screen will appear. Press the
<Ctrl> and <I> keys simultaneously to enter the utility. The utility
allows you to build a RAID system on Serial ATA drives.
JMicron RAID BIOS
The JMicron RAID BIOS utility is used to configure and manage
RAID on Serial ATA drives connected to SATA 7 and SATA 8.
When the system powers-up and all hard disk drives have been
detected, the JMicron RAID BIOS status message screen will appear.
Press the <Ctrl> and <J> keys simultaneously to enter the utility.
The utility allows you to build a RAID system on Serial ATA drives.
Important:
Before creating RAID, make sure you have installed the Serial
ATA drives and connected the data cables otherwise you won't
be able to enter the RAID BIOS utility.
Refer to chapter 5 for steps in configuring RAID.
3
BIOS Setup
105