LanParty X58-T3EH6 User Manual page 73

USB Device Setting
USB 1.0 Controller
USB 2.0 Controller
USB Operation Mode
USB Keyboard Function
USB Mouse Function
USB Storage Function
*** USB Mass Storage Device Boot Setting ***
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
USB 1.0 Controller
This field is used to enable or disable the Universal Host Controller
Interface (USB 1.0).
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller
Interface (USB 2.0).
USB Operation Mode
This field is used to select the USB's operation mode. The options
are Full/Low Speed and High Speed.
USB Keyboard Function
Due to the limited space of the BIOS ROM, the support for legacy
USB keyboard (in DOS mode) is by default set to Disabled. With
more BIOS ROM space available, it will be able to support more
advanced features as well as provide compatibility to a wide variety
of peripheral devices.
If a PS/2 keyboard is not available and you need to use a USB
keyboard to install Windows (installation is performed in DOS
mode) or run any program under DOS, set this field to Enabled.
Phoenix - AwardBIOS CMOS Setup Utility
USB Device Setting
Enabled
Enabled
High Speed
Enabled
Enabled
Enalbed
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level
[Enable] or [Disable]
Universal Host
Controller
Interfacefor Universal
Serial Bus USB
Operation Mode
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
7 3