LanParty X58-T3EH6 User Manual page 91

RAS# to CAS# Delay (tRCD)
This field is used to select the RAS# to CAS# delay time when
reading and writing to the same bank.
RAS# Precharge (tRP)
This field is used to select the idle clocks after issuing a precharge
command to the DRAM.
Precharge Delay (tRAS)
The options are Auto, and 1 to 31.
REF to ACT Delay (tRFC)
The options are Auto, and 16 to 33.
Write to PRE Delay (tWR)
The options are Auto, and 6 to 31.
Rank Write to Read (tWTR)
The options are Auto, and 1 to 31.
ACT to ACT Delay (tRRD)
The options are Auto, and 1 to 15.
Row Cycle Time (tRC)
This field is used to select the row cycle time, RAS# active or auto
refresh of the same bank.
Read CAS# Precharge (tRTP)
The options are Auto, and 1 to 15.
Four ACT WIN Time (tFAW)
The options are Auto, and 1 to 31.
3
BIOS Setup
9 1