LanParty X58-T3EH6 User Manual page 80

3
BIOS Setup
PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
x IRQ Resources
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Init Display First
PCIEx
PCI Slot
Reset Configuration Data
Enabled
Disabled
8 0
Phoenix - AwardBIOS CMOS Setup Utility
Init Display First
Reset Configuration Data
Resources Controlled By
PCI/VGA Palette Snoop
** PCI Express Relative Items **
Maximum Payload Size
: Move Enter: Select
When the system boots, it will first initialize the
PCI Express x16 graphics card.
When the system boots, it will first initialize PCI.
The BIOS will automatically reset the Extended
System Configuration Data (ESCD) once. It will
then recreate a new set of configuration data.
The BIOS will not reset the configuration data.
PnP/PCI Configurations
PCI Slot
Disabled
Auto(ESCD)
Press Enter
Disabled
128
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults