LanParty X58-T3EH6 User Manual page 137

CrossFire Setup
Note:
• Uninstall all existing graphics card drivers before installing
the ATI CrossFireX graphics cards.
• Use identical ATI CrossFireX graphics cards.
• The system board used in the following illustrations may not
resemble the actual board. These illustrations are for refer-
ence only.
1. Power-off the system and monitor then unplug the power cord.
2. Remove the screw of the bracket that is opposite the PCIE 1
and PCIE 4 slots then remove the brackets.
PCIE 1
PCIE 4
Multiple GPUs
6
137