LanParty X58-T3EH6 User Manual page 11

The JMicron JMB363 controller supports up to two
UltraDMA 100Mbps IDE devices and two Serial ATA
JMB363 JMB363 JMB363
JMB363 JMB363
devices.
Serial ATA is a storage interface that is compliant with
SATA 1.0 specification. Intel ICH10R and JMicron
JMB363 both support speed of up to 3Gb/s. Serial ATA
improves hard drive performance faster than the stand-
ard parallel ATA whose data transfer rate is 100MB/s.
The Intel ICH10R chip allows configuring RAID on Serial
ATA devices. It supports RAID 0, RAID 1, RAID 0+1 and
RAID RAID RAID RAID RAID
RAID 5. The JMicron JMB363 chip allows configuring
RAID on another 2 Serial ATA devices. It suppor ts
RAID 0 and RAID 1.
The Mar vell 88E8053 PCI Express Gigabit LAN
Gigabit Gigabit Gigabit
Gigabit Gigabit
controller supports up to 1Gbps data rate.
L L L L L AN AN AN
AN AN
IEEE 1394 is fully compliant with the 1394 OHCI (Open
I E E E I E E E I E E E
I E E E I E E E
Host Controller Interface) 1.1 specification. It supports
1 3 9 4 1 3 9 4 1 3 9 4 1 3 9 4 1 3 9 4
up to 63 devices that can run simultaneously on a
system. 1394 is a fast external bus standard that
supports data transfer rates of up to 400Mbps. In addition to its
high speed, it also supports isochronous data transfer which is ideal
for video devices that need to transfer high levels of data in real-
time. 1394 supports both Plug-and-Play and hot plugging.
CMOS Reloaded is a technology that allows storing mul-
tiple user-defined BIOS settings by using the BIOS utility
to save, load and name the settings. This is especially
useful to overclockers who require saving a variety of
overclocked settings and being able to conveniently switch between
these settings simultaneously.
The options in Genie BIOS allows configuring the system
to optimize system performance and overclock capability.
1
Introduction
11