Maintenance - MULTIQUIP GA3.6HR Operating Manual

8. To restore power, press the RESET button (Figure 42)
on the GFCI module and verify that the red FAULT LED
turns OFF and the green POWER LED should turn ON
GREEN
POWER
LED
MANUAL RESET
Figure 42. GFCI Module (Green LED ON Reset)
9. Verify that the AC voltmeter is registering a voltage
reading as indicated by Figure 43.
Figure 43. AC Voltmeter (120/240V)
NOTICE
It is recommended that the GFCI unit be tested when
the generator is initially taken out of the box. Then, the
generator should be tested daily at startup.
CAuTiON
The GFCI module is designed to interrupt power when
a ground fault exists to prevent injuries and shock
hazards. dO NOT operate the generator if this test fails.
Consult a qualified electrician for repair or replacement
of the GFCI module.
ga3.6HR 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (09/17/14) — pAgE 33
F
P
A
O
W U
E L
R T
PRESS
240
120
V

mAINTENANCE