Table of Contents
Advertisement
SmartNode 4660 & 4670 User Manual
General observations
•
Clean the case with a soft slightly moist anti-static cloth
•
Place the unit on a flat surface and ensure free air circulation
•
Avoid exposing the unit to direct sunlight and other heat sources
•
Protect the unit from moisture, vapors, and corrosive liquids
This device contains no user serviceable parts. This device can only be
repaired by qualified service personnel.
Cet appareil contient des pièces n'est réparable par l'utilisateur. Ce dispositif
ne peut être réparé par du personnel qualifié.
In accordance with the requirements of council directive 2002/
96/EC on Waste of Electrical and Electronic Equipment (WEEE),
ensure that at end-of-life you separate this product from other
waste and scrap and deliver to the WEEE collection system in
your country for recycling.
Always follow ESD prevention procedures when removing and
replacing cards.
Wear an ESD-preventive wrist strap, ensuring that it makes good
skin contact. Connect the clip to an unpainted surface of the
chassis frame to safely channel unwanted ESD voltages
to ground.
To properly guard against ESD damage and shocks, the wrist
strap and cord must operate effectively. If no wrist strap is avail-
able, ground yourself by touching the metal part of the chassis.
About this guide
12
Advertisement
Table of Contents
