SmartNode 4660 & 4670 User Manual
Configuring the default gateway
To configure the default gateway on the SmartNode:
1. In the configuration menu pane, click IP/DNS. Click on the Routes tab. The Configuration screen for
Static Routes displays
2. Enter details for the following fields:
Destination IP—Enter 0.0.0.0 as the destination IP address for forwarding all traffic.
Destination Mask—Enter 0.0.0.0 as the destination netmask for forwarding all traffic.
Gateway—Enter the IP address of the upstream router.
3. Click the Apply icon
Configuring your SmartNode
(figure
12).
Figure 12. Default Gateway Configuration
to save your settings.
4 • SmartNode initial configuration
35