Table of Contents
Advertisement
Model 3101 Series Getting Started Guide
CAUTION
General observations
•
Clean the case with a soft slightly moist anti-static cloth
•
Place the unit on a flat surface and ensure free air circulation
•
Avoid exposing the unit to direct sunlight and other heat sources
•
Protect the unit from moisture, vapors, and corrosive liquids
Typographical conventions used in this document
This section describes the typographical conventions and terms used in this guide.
General conventions
The procedures described in this manual use the following text conventions:
Convention
Garamond blue type
Garamond bold type
< >
Electrostatic Discharge (ESD) can damage equipment and impair electrical cir-
cuitry. It occurs when electronic printed circuit cards are improperly handled
and can result in complete or intermittent failures. Do the following to prevent
ESD:
•
Always follow ESD prevention procedures when removing and replacing
cards.
•
Wear an ESD-preventive wrist strap, ensuring that it makes good skin con-
tact. Connect the clip to an unpainted surface of the chassis frame to safely
channel unwanted ESD voltages to ground.
•
To properly guard against ESD damage and shocks, the wrist strap and cord
must operate effectively. If no wrist strap is available, ground yourself by
touching the metal part of the chassis.
Table 1. General conventions
Indicates a cross-reference hyperlink that points to a figure, graphic, table, or sec-
tion heading. Clicking on the hyperlink jumps you to the reference. When you
have finished reviewing the reference, click on the Go to Previous View
button
in the Adobe® Acrobat® Reader toolbar to return to your starting point.
Indicates the names of command buttons that execute an action.
Angle brackets indicate function and keyboard keys, such as <SHIFT>, <CTRL>,
<C>, and so on.
Meaning
About this guide
16
Advertisement
Table of Contents
