ADEMCO LYNXR Installation Manual page 48

LYNX *80 DEFAULT TABLE: APPLIES TO DEFAULT TABLE 4 (devices 2-7 have no default values)
Device Number Action
1 2
8** 2
** NOTE: If using an X-10 Powerhouse Security SH10A siren as device 8, you must change the device action default to "3" if using default
table 4.
LYNX *80 DEFAULT TABLE: APPLIES TO DEFAULT TABLE 1 and 2 (devices 2-7 have no default values)
Device Number Action
8** 2
LYNX *81 ZONE LIST FOR OUTPUT DEVICES DEFAULT TABLE:
Zone List 1 28, 32
Zone List 2 29, 33
Zone List 3 2, 3
Start
Event Zone List System Operation
2 1
Start
Event Zone List System Operation
– 48 –
Zone Type Restore of
Zone List
2
33
Zone Type Restore of
Zone List
33
Apply To Default Table 1 - 4.
Stop
Zone type
System operation
36
Stop
Zone type
System operation
36