7. Video Monitor commands
7-1 Activate the video monitor function
VS
(Note: Video output signal is only available at the video output connector
To read: VS<CR>
VSn
Response:
7-2 Frequency shift reverse
Some video transmitters utilize reversed frequency shift modulation in order to
VD
scramble the signal.
To read: VD<CR>
VDn
Response:
8. I/Q output commands
When an optional Digital I/Q output unit is installed, USB 2.0 compatible I/Q data output is available.
25MHz to 3.15GHz only
The separate AOR IQ driver must be installed before using this function.
8-1 I/Q bandwidth
In order to use the I/Q output function, you must have an operating system that is compatible with
Isochronous mode and USB 2.0 format.
(Note: A Windows® XP compatible PC is required to use I/Q function.)
IQ
To read: IQ<CR>
IQn
Response:
n: 0, 1
VSn
on the front panel.)
VDn
IQn
0: Deactivate video monitor function
(default)
1: Activate video monitor function
n: 0, 1
0: Normal shift (default)
1: Reverse shift direction
n: 0, 1
0: 300kHz (default)
1: 1MHz
42