16. RESET
Should the AR2300 appear to behave strangely, normal operation may be easily achieved by resetting
the microprocessor. Two scenarios may be encountered due to power transients etc:
1.
Symptom: No control of the receiver from a PC.
2.
Symptom: The PC screen freezes.
Should AR2300 still behave strangely, (while the receiver is ON) push the internal reset button "S3" which
is accessible through the bottom case as illustrated:
(the case does not need to be opened)
Turn off the power switch on the front panel. Leave it off for
Action:
approximately 30 seconds. Turn the power switch back on again.
Normal operation should be restored but the last used frequency will be lost.
The AR2300 will restore the second-last frequency to display.
Reboot your PC and run the control program again.
Action:
58