Main Features - AOR AR2300 Operating Manual

Main features:

Wide frequency coverage: 40kHz to 3.15 GHz, with no interruptions (cellular blocked for US
consumer version)
PC controllable
DDS (direct digital synthesizer) local oscillator
Analog TV reception in both NTSC and PAL formats
IF signal output (45.05MHz, +/- 7.5MHz for a total of 15MHz bandwidth) 25MHz to 3.15GHz only.
Multi-mode unit capable of receiving AM (synchronous), ISB, USB, LSB, CW, AIQ (AF-IQ), WFM
including FM stereo (optional headphone or stereo speakers required), NFM and APCO25 digital
(optional)
Composite video output on the front panel of the unit
SD/SDHC card interface
Selectable IF bandwidths: 200Hz, 500Hz, 1kHz, 3kHz, 6kHz, 15kHz, 30kHz, 100kHz, and 200
kHz along with the ability to shift the IF
CTCSS and DCS selectable squelch functions
DTMF tone decode
Built-in voice-inversion descrambling (Not available for the US consumer version)
CW pitch control, AGC, AFC
Auto-notch, noise reduction (NR), noise blanker (NB) features
Fast Fourier Transform (FFT) analyzer for fast spectrum display processing
12kHz I/Q output for DRM PC receiver
USB 2.0 interface
Two antenna ports (type N)
Five VFO's, 2,000 alphanumeric memories
Trio frequency receive (receive 3 frequencies simultaneously)
Digital voice recording (requires SD or SDHC card)
I/Q output with 1MHz bandwidth (optional) 25MHz to 3.15GHz only
Frequency coherent (with optional GPS receiver unit)
LAN (Local Area Network) control (with optional LAN interface)
6