Control Commands; Command Format - AOR AR5001D Manual

13. When the installation is completed, click "Finish".
14. In order to find the assigned serial port for the USB port, click the "Start", "Control Panel",
"System", "Hardware", "Device Manager", "Ports (COM&LPT)" on the PC monitor screen..
USB Serial port (COM x) will be indicated. (Note: "x" varies from your PC configuration.)
Below screen shows the COM8 has been assigned for the USB port.
2

CONTROL COMMANDS

2-1

COMMAND FORMAT

<command><CR>
<command><parameter><CR>
<command><parameter 1><SP><parameter 2><SP><parameter 3><CR>
Each command is completed with a <CR>(0x0d).
No space should be put between command and parameter
Note: SP -- Space
Each command consists of two upper case letters (header) (except the SD command) along with
operations as required. All commands use ASCII code which MUST BE IN UPPER CASE (except
for the up arrow key, down arrow key, right arrow key, and left arrow key.)
All manuals and user guides at all-guides.com
9