Squelch Skip; Start/Stop Recording; Start/Stop Playback; Recording Status - AOR AR2300 Operating Manual

12-7 Squelch skip

SD RSQ
To read: SD RSQ<CR>
SD RSQ n
Response:

12-8 Start/stop recording

SD REC
Execute the command to start/stop recording audio onto the designated file.
(Note: 1. File name: up to 8 characters. English letters (capital) and some

12-9 Start/stop playback

SD PLY
Execute the command to start/stop playback audio from the designated file.
(Note: 1. File name: up to 8 characters. English letters (capital) and some
Note: Following characters cannot be used as a file name:
¥ / , ; : * ? " < > | .

12-10 Recording status

SD PST
(Commands can be sent even during playback or recording)
Response: : : :
SD RSQ n n:0, 1
SD REC (file name)
selected characters can be used as a file name. The file extension
will be automatically set to .wav. If the file name already exists, it will
be automatically overwritten.
2. To stop recording, use the "/" as a file name.
3. If the file size exceeds 2GB, it will stop recording.
SD PLY (file name)
selected characters can be used as a file name. The file extension
will be automatically set to .wav.
2. To stop playback, use the "/" as a file name.
SD PST
0: stand-by mode
1: recording audio even while squelch is closed.
2: Playback mode
3. recording audio while squelch is open or stand-by mode.
0: recording audio even while squelch is closed.
1: recording audio only while squelch is open.
(default:: 0)
(Direct command)
(Direct command)
48