Delete Vfo Pass; Delete Memory Bank - AOR AR8600 Operating Manual

Hide thumbs Also See for AR8600:
Table of Contents

Advertisement

If no data is present the legend "DEL PASS --" will be displayed. To delete the frequency pass data
, the legend "DEL PASS --" confirms deletion.
Note: When searching, an empty search bank will cause the next search bank containing
valid data to be recalled.
to exit the menu returning to the standard display, alternatively
to the next item in the menu "DELETE VFO PASS".

10-2 DELETE VFO PASS

It is possible to delete all VFO frequency pass channels using the DELETE menu (also possible in the
VFO PASS menu accessed by
While in search mode, the DELETE menu is accessed using the key sequence
, (while in SCAN or VFO mode use the key sequence
).
selection point.
If VFO-PASS channels exist, the legend "VFO-PASS xx" will be displayed with the "xx" number
(00 to 49) indicating that data is present. If no data is present the legend "VFO-PASS --" will be
displayed. To delete VFO-PASS data
to exit the menu returning to the standard display, alternatively
to move to the next item in the menu "DELETE MEM-BANK".

10-3 DELETE memory bank

The DELETE MEMORY BANK menu enables complete memory banks to be deleted in one simple
operation.
While in search mode, the DELETE menu is accessed using the key sequence
, (while in SCAN or VFO mode use the key sequence
).
selection point.
Use the main dial,
and a - j. Memory banks which are write protected cannot be deleted, you must remove the protection
first, even a single protected memory channel in the displayed memory bank will prevent deletion. You
may remove the write protection for all memory channels in one go, refer to section 11 of this manual.
If no memory data exists in the selected memory bank, the legend "MEM-BANK X--" will be displayed.
If memory data does exist, the legend "MEM-BANK Xxx" will be displayed with the "xx" number
(00 to 89) indicating that data is present.
the
key twice to move the cursor to the "DELETE VFO-PASS"
the
key three times to move the cursor to the "DELETE MEM-BANK"
keys or keypad to select the desired memory bank from the 20 available A - J
, refer to section 4-3-4 of this manual).
, the legend "VFO-PASS --" confirms deletion.
to move
the
key

Advertisement

Table of Contents
loading

Table of Contents