Preparation - Icom ID-1 Service Manual

SECTION 5

5-1 PREPARATION

When adjusting ID-1, ADJUSTMENT SOFTWARE, JIG CABLE (see illustration on page 5-2) and OPC-1127
quired.
▄ REQUIRED TEST EQUIPMENT
EQUIPMENT
Output voltage
DC power supply
Current capacity
Frequency range
Modulation analyzer
Measuring range
Frequency range
Frequency counter Frequency accuracy
Sensitivity
Digital multimeter Input impedance
Measuring range
Frequency range
RF power meter
Impedance
SWR
Frequency range
Spectrum analyzer
Spectrum bandwidth
M SYSTEM REQUIREMENTS
• Microsoft ® Windows ® 98/98SE/Me/2000/XP
• USB port
M ADJUSTMENT SOFTWARE INSTALLATION
q Quit all applications when Windows is running.
w Insert the CD into the appropriate CD drive.
e Double-click the "Setup.exe" contained in the adjustment
software folder in the CD drive.
r The "Welcome to the InstallShield Wizard for adjustment
software screen will appears.
Click [Next>].
t The "Choose Destination Location" will appears.
Click [Next>] to install the software into the specifi ed fold-
er.
y After the installation is completed, the "InstallShield Wiz-
ard Complete" will appears.
Click [Finish].
u Eject the CD.
i The adjustment software icon appears on the desktop
screen.
M STARTING SOFTWARE ADJUSTMENT
q Connect the transceiver and PC with the OPC-1127.
w Turn the transceiver power ON.
e Boot up Windows, and double click the adjustment soft-
ware icon on the desktop screen.
Then the control panel screen will appears.
r Click [Adjustment (A)] in the menu bar and then click [Ad-
justment panel (F9)] in the pull down menu.
Then the adjustment screen will appears.
t Set or modify adjustment data as desired.
ADJUSMENT
GRADE AND RANGE
: 13.8 V DC
: 10 A or more
: DC–1500 MHz
: 0 to ±10 kHz
: 0.1–1500 MHz
: ±1 ppm or better
: 100 mV or better
: 10 MΩ/V DC or more
: 1–20 W
: 1000–1500 MHz
: 50 Ω
: Better than 1.2 : 1
: At least 1500 MHz
: 100 kHz or more
PROCEDURESE
EQUIPMENT
Audio generator
Attenuator
Standard signal
generator (SSG)
AC millivoltmeter
Oscilloscope
External speaker
DC Ammeter
M OPERATING ON THE ADJUSTMENT MODE
(CONNECTED COMPUTER KEYBOARD)
• Adjustment item selection*
• Specifi ed value adjustment
• Mode selection
• PTT control
• RF power selection
• AF level control [UP]
• AF level control [DOWN]
• Squelch level control [UP]
• Squelch level control [DOWN]
• Read the transceiver's data
• All Default setting
* When select the adjustment item, the adjustment frequency
and operating mode are selected automatically.
5 - 1
USB CABLE
GRADE AND RANGE
Frequency range : 300–3000 Hz
Measuring range : 1–500 mV
Power attenuation : 50 or 60 dB
Capacity : 20 W
: 0.1–1500 MHz
Frequency range
: 0.1 µV to 32 mV
Output level
(–127 to –17 dBm)
Measuring range : 10 mV to 10 V
Frequency rang : DC–20 MHz
Measuring range : 0.01–20 V
: 8 Ω
Input impedance
Capacity : 10 W or more
Measuring capacity : 3 A
: [↑]/[↓]
: [←]/[→]
: [M]
: [T]
: [P]
: [Q]
: [W]
: [A]
: [S]
: [F5]
: [CTRL]+[D]
are re-