Icom ID-1 Service Manual page 4

Digital
Hide thumbs Also See for ID-1:
Table of Contents

Advertisement

SECTION 1 SPECIFICATIONS
GENERAL
• Frequency coverage
• Type of emission
• Transmission speed (theoretical value) : Data
• Codec
• Number of memory channel
• Tuning steps
• Frequency stability
• Operating temperature range
• Antenna connector
• Power supply requirement
• Current drain (at 13.8 V DC)
• Dimensions (projections not included) :
Main unit
Remote controller (RC-24)
• Weight (Approx.)
Main unit
Remote controller (RC-24)
TRANSMITTER
• Output power (at 13.8 V DC)
• Modulation
• Maximum frequency deviation (FM)
• Spurious emissions
• Microphone connector
RECEIVER
• Receive system
• Intermediate frequencies
• Sensitivity
• Selectivity (typical)
• Spurious and image rejection
• Audio output power (at 13.8 V DC)
• Squelch sensitivity (at threshold)
• Ext. speaker connector
All stated specifi cations are subject to change without notice or obligation.
: 1240.000–1300.000 MHz
: FM, GMSK (Digital)
128 kbps
Digital voice
4.8 kbps
: AMBE (2.4 kbps)
: 105 (incl. 2 scan edges and 3 calls)
: 5, 6.25, 10, 12.5, 20, 25, 50, 100 kHz
: ±2.5 ppm (–10˚C to +60˚C)
: –10˚C to +60˚C (–22˚F to +140˚F)
: Type-N (50 Ω)
: 13.8 V DC ±15% (Negative ground)
: Transmit
Less than 7 A (at 10 W)
Receive
Less than 1.5 A (AF max.)
141(W)×40(H)×165.8(D) mm; 5
150(W)×50(H)×49.5(D) mm; 5
:
1.2 kg; 2 lb 10 oz
220 g; 7.7 oz
: 10/1 W
: Variable reactance frequency modulation (FM)
Quadrature modulation (Digital)
: ±5.0 kHz
: Less than –50 dB
: 8-pin modular jack (600 Ω)
: Triple conversion superheterodyne system (FM, DV)
Double conversion superheterodyne (DD)
: 1st IF: 243.95 MHz, 2nd IF: 31.05 kHz, 3rd IF: 450 kHz (FM, DV)
1st IF: 243.95 MHz, 2nd IF: 10.7 MHz (DD)
: Less than 0.18 µV (–122 dBm) at 12 dB SINAD (FM)
Less than 0.35 µV (–116 dBm) at BER 1×10
Less than 1.58 µV (–103 dBm) at BER 1×10
: More than 12 kHz/6dB, Less than 30 kHz/60 dB (FM)
More than 6 kHz/6dB, Less than 18 kHz/50 dB (DV)
More than 140 kHz/6dB, Less than 520 kHz/40 dB (DD)
: More than 50 dB
: 2.0 W at 10% distortion with an 8 Ω load
: Less than 0.18 µV (–122 dBm) (FM only)
: 2-conductor 3.5 (d) mm/(
1 - 1
17
9
9
(W)×1
(H)×6
16
16
15
29
31
(W)×1
(H)×6
32
32
–2
(DV)
–2
(DD)
")/8 Ω
1
8
(D) in
32
(D) in
16

Advertisement

Table of Contents
loading

Table of Contents