Changes - 2N SingleTalk User Manual

1.3 Changes

Manual
Version
1.0
4.0
5.0
6.1
The manufacturer reserves the right to modify the product in order to improve its
qualities.
Changes
First versions of the product and User Manual

Functional replacement of the 91340.... series (Lift EasyTalk)

Addition of the Compact version.

Changed default values of parameters 902 and 915

On-board microphone (apart from custom versions)

All communicators, produced since half of 2010, has a loudspeaker

connected by cable, to alow amlifier installation.
HW issue 5 and higher – optional onboard / external microphone

HW issue 7 and higher (model 2011):

o is equipped with a powerfull 50 mm speaker
o amplifier installation is easier.
SW version 10-08-24:

o Changed default values of parameters 913 and 914
o Recognizes all dual tones, new parameter 946.
o New parameter 975 – extended message options, separately for call
before and after confirmation.
o Extended DTMF 3 command: plays user recorded message, then
identification number and serial number.
o New function 995 – tells software version
o West Europe language set: English, German, Portuguese, Dutch.
o Phone numbers, stored as a factory default (in client-designed
versions) are hold over initialization.
Changes 1.3
12