Contec 955 Series User Manual page 79

5. BIOS Setup
Table 5.14. PCI PnP/PCI Configuration Setup Selections
Description Choices
Init Display First
Initialize the onboard video display before initializing any
other display device on the system. Thus the onboard display
becomes the primary display.
Reset Configuration Data
Normally, you leave this field Disabled. When you want to
reset the resource assignment for the change of Enable /
Disable of COM or other reasons, set this field to Enabled.
After BIOS setup, ESCD (Extended System Configuration
Data) should be reset.
Resource Controlled by
The Award Plug and Play BIOS can automatically configure
all the boot and Plug and Play – compatible devices. If you
select Auto, all the interrupt request (IRQ) and DMA
assignment fields disappear, as the BIOS automatically
assigns them.
72
PT-955LXC-DC5311 User's manual