Contec 955 Series User Manual page 52

5. BIOS Setup
Description Choice
Security Option
Select whether the password is required every time the
system boots or only when you enter setup. If you have set a
password, select whether the password is required every
time the System boots, or only when you enter Setup.
System: The system will not boot and access to Setup will be
denied if the correct password is not entered at the prompt.
Setup: The system will boot, but access to Setup will be
denied if the correct password is not entered at the prompt.
Note: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked to enter password. Do
not type anything and just press <Enter>, it will disable security. Once the security is disabled, the system will boot and
you can enter Setup freely.
APIC Mode
APIC stands for Advanced Programmable Interrupt
Controller.
Note : This item is show only
MPS Version Control For OS
Use the Multiprocessor Specification (MPS) for OS option to
specify the MPS version to be used. MPS version 1.4 added
extended configuration tables to improve support for
multiple PCI bus configurations and improve future
expandability.
OS Select For DRAM > 64M
Select the operating system that is running with greater
than 64MB of RAM on the system.
45
PT-955LXC-DC5311 User's manual