Setting The File Margin; Stapling - Konica Minolta BIZHUB C250P User Manual

Specifying printer driver settings

Setting the file margin

File margins are added to the document before it is printed.
1
Click the Layout tab.
2
From the "Binding Position" drop-down list, select the position of the
binding margin.

Stapling

Multiple-page documents can be stapled.
1
Click the Layout tab.
2
From the "Staple" drop-down list, specify the number of staples and
the stapling position.
Note
The staple function is available only when optional Finisher is installed.
Note
Depending on the selected Binding Position setting, different stapling po-
sitions are available.
The number of staples that can be selected varies depending on the fin-
isher that is installed.
When optional finisher FS-501 is installed, "1 staple" can be set. When
optional finisher FS-514 or FS-603 is installed, "1 staple" or "2 staples"
can be set.
C250P
3
3-55