Setting Options - Konica Minolta BIZHUB C250P User Manual

Specifying printer driver settings
Note
"Center Staple and Fold" cannot be specified if "Staple" or "Punch" has
been selected.
The available center binding and folding settings differ depending on the
finisher that is installed. When FS-514 is installed, in addition to "Fold &
Staple" (which folds the documents in half before stapling them), "Center
Staple" (which binds documents with staples at the center) and "Fold"
(which folds documents in half) are available. When FS-603 is installed,
only "Center Staple and Fold" is available.
The number of staples that can be selected varies depending on the fin-
isher that is installed.
When optional finisher FS-501 is installed, "1 staple" can be set. When
optional finisher FS-603 or FS-514 is installed, "1 staple" or "2 staples"
can be set.

Setting options

You can specify the options installed on this machine so that they can be
used from the printer driver.
Reminder
If the installed options are not set from the Installable Options screen, the
function for the option cannot be used with the printer driver. When in-
stalling options, be sure to specify the correct settings.
C250P
3
3-88