Specifying Macintosh Settings - Konica Minolta BIZHUB C250P User Manual

Setting up the printer driver
Note
The Bonjour connection is a Mac OS X 10.4 function, it is the same func-
tion as the Rendezvous connection in Mac OS 10.3 or earlier.
Reminder
When turning the machine off, wait for 10 seconds or longer before turn-
ing it on again; otherwise the machine may not function normally.

Specifying Macintosh settings

Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
Reminder
For network settings, consult the network administrator.
For printer driver installation, refer to "Installing the printer driver" on
page 2-22.
Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not re-
quired to change the settings. Bonjour/Rendezvous is a Mac OS X func-
tion. For Mac OS 9.2, connect using AppleTalk.
For Mac OS X
1
On the Apple menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the TCP/IP tab.
5
Select the items from "Configure" that correspond to the network set-
tings for the Macintosh computer that is connected to the network, and
then set the IP address and subnet mask.
6
If using an AppleTalk connection, click the AppleTalk tab, and then
check that the "Make AppleTalk Active" check box is selected.
C250P
2
2-67