Konica Minolta BIZHUB C250P User Manual page 284

Control panel settings
http Server
Disable
Proof
Network
Speed
I/F Setting
Parameters
Parallel Timeout
Network Timeout
USB Timeout
Parallel I/F
IEEE 1284/USB
Time Adjustment
Parameters
NTP Setting
NTP Server Add.
Port No.
C250P
Parameters
http Server Set
PSWC Setting
IPP
IPP Setting
IPP Auth.
Accept IPP Job
Support Info.
Printer Info.
Select whether or not to permit a connection if the period of va-
lidity for the SSL sever certificate has expired when this ma-
chine is connecting to an SSL server as a client.
Select the operating speed.
Description
Specify the length of time until a transmission
timeout occurs.
Specify the length of time until a transmission
timeout occurs.
Specify the length of time until a transmission
timeout occurs.
Specify the mode for using a parallel inter-
face.
Select whether a parallel or USB interface is
used.
Description
Select whether or not the time is obtained
through NTP.
Specify the IP address or DNS name of the
NTP server.
Specify the receiving port number for NTP.
Description
Select whether or not the http server
settings are used.
Select whether or not PageScope
Web Connection is used.
Specify IPP print settings.
Select whether or not IPP printing is
used.
Select whether or not authentication
is performed.
If IPP authentication is performed,
select the authentication method.
Select whether or not IPP jobs are
permitted.
Specify the print operations sup-
ported by IPP.
Specify the printer information.
4
Initial Setting
ON
ON
—
ON
—
ON
—
—
Permit
Auto
Initial Setting
15 sec.
15 sec.
15 sec.
ECP
USB
Initial Setting
ON
—
123
4-41