Konica Minolta BIZHUB C250P User Manual page 46

Installation and operation precautions
The illustration above shows the main unit with the optional automatic duplex
unit, LCT, and dehumidifier heater installed.
No. Part Name
20 Power connector
21 Dehumidifier heater power switch
22 Filter 2
23 IEEE1284 port (type C)
24 USB port (type B)
USB 2.0/1.1-compliant
25 Network connector
(10 Base-T/100 Base-TX)
26 Ozone filter
27 Finisher connector
28 Filter 1
C250P
Description
Used for connecting the power cord
Used to turn the dehumidifier heater on and off.
Turning on the dehumidifier heater reduces mois-
ture in the paper. This switch is used when the op-
tional dehumidifier heater is installed.
Collects the toner dust generated in the machine
Used for connecting the parallel cable from the
computer
Used for connecting a USB cable from the compu-
ter
Used for connecting the network cable when this
machine is used for network printing and network
scanning
Collects the ozone generated in the machine
Used for connecting the finisher hookup cord
Collects the toner dust generated in the machine
1
1-27