Konica Minolta BIZHUB C250P User Manual page 433

Troubleshooting
Message
Trouble C-xxxx Call
Service
If any message other than those listed above appears, perform the operation
described in the message.
*1 For a message concerning the paper, the paper tray, paper size and paper
type are indicated as codes in the second line.
Example: T1: A4-R NRML
(For A4-R-sized plain paper in Tray 1)
The codes represent the following.
- Trays
T1 to T4 (Tray 1 to Tray 4), BP (bypass tray), LC (LCT)
- Paper size
AO, AO-R, BO, BOx-R ("O" is replaced with a number that indicates the
paper size.)
LD (11 × 17), LG (Legal), LT (Letter), IV (Invoice), EX (7-1/4 × 10-1/2)
8K, 16K, 16K-R
OOW or OOWR (wide paper for each size), FR (custom size)
- Paper type
NRML (plain paper), 1SIDE (paper only for single-sided printing), OHP,
TH1 to TH3 (thick paper 1 to 3)
CP (colored paper), LTHD (letterhead), ENV (envelopes), and SP (special
paper)
C250P
Cause
The machine malfunctioned
and is unable to make prints.
Remedy
Inform your technical representative
of the code displayed on the control
panel.
8
8-68