Connecting To The Computer; If The Scanner Is The Only Or Last Device In The Chain - Minolta Film Scanner II Hardware Manual

IF THE SCANNER IS THE ONLY OR LAST DEVICE IN THE CHAIN...

TURN OFF THE COMPUTER AND ALL THE SCSI DEVICES
BEFORE CHANGING SCSI IDS, CONNECTING SCSI
CABLES, OR DISCONNECTING SCSI CABLES.
One D-sub-25 to Centronics 50 cable is included with your scanner. Please see your dealer if you require a
different cable.

CONNECTING TO THE COMPUTER

1. Connect one end of the SCSI cable to either
2. Connect the other end of the SCSI cable to the
3. Flip the dip switch marked 1 up to turn the
SCSI port on the back of the scanner.
• Either SCSI port can be used, there is no dedicated in or
out port.
SCSI port on the computer or on the last SCSI
device in the chain.
terminator on.
• Dip switches 2 through 4 are inactive. Their position will not
affect the scanner operation.
9 Continued on following page.