Table of Contents
Advertisement
The indicator lamp on the front of the scanner reveals the status of the scanner.
Indicator Lamp
Off
Green – blinking slowly
Green – blinking quickly
Green – glows steadily
Red – glows steadily
Red – blinks quickly
INDICATOR LAMP
Scanner Status
Set up is complete and there is no holder
inserted in the scanner.
Scanner is busy:
• setting up (initializing).
• index scanning, prescanning, or scanning.
• autofocus, point AF, manual focus.
If using a film holder, the scanner is busy:
• loading the film holder.
• transporting the film holder.
• ejecting the film holder.
If using the APS Adapter, the scanner is busy:
• rewinding the film in the APS adapter.
• transporting the adapter.
There is a film holder in the scanner. The
scanner is not busy.
There is a problem with the accessory panel.
If using a film holder:
The accessory panel is open. Close the
accessory panel.
If using the APS adapter:
The accessory panel is not fully open.
Open it all the way and push it until it clicks.
The fluorescent lamp unit cover is not fully
closed.
or
The fluorescent lamp is burnt out.
or
There is a hardware malfunction. Contact a
Minolta Service facility.
33
Advertisement
Table of Contents
