Table of Contents
Advertisement
When an alarm occurs in a zone programmed for
silent or invisible alarms, audible warnings do not
Silencing Alarms
Refer to page 33 for additional details on what to do when an alarm sounds.
Alarm
FIRE
INTRUSION (Burglary)
EMERGENCY (Non-Medical)
AUXILIARY
* Note: Contact your installing company to program bell sounds.
Single-Area Systems
Multi-Area Systems
Technical Manuals Online! - http://www.tech-man.com
Speaker Sound
Rapid high-low siren sound. Each high-low
sound lasts approximately 1/2 second.
Loud whoop sound; 3 whoops per second.
Slow, high-low siren sound. Each sound lasts
about 6 seconds.
Low-high siren sound.
To silence any alarm:
Press
+ code.
MUTE
Press
+ code.
MUTE
sound and LCD messages do NOT display, but the
alarm is still reported to the central station.
1 sec. on, 1 sec. off.
Steady.
*None
*None
To reset an alarm:
Enter your code.
Enter your code, then press
34
Bell Sound
.
Advertisement
Table of Contents
