System Messages - Regency 4821 User Manual

System Messages

Your system communicates with you primarily through the touchpad. Refer to the following list if you need more
information about a message that appears on your touchpad LCD. Messages are in alphabetical order.
Access code not
verified
Access Denied.
Can Not Arm
Can Not Disarm
Can Not Reset
CODE2 Not Active
CODE2 User
No Common Areas
Normal User
Outside Time Win
To Zone < number >
Technical Manuals Online! - http://www.tech-man.com
An invalid access code was entered. A valid entry is 4 to 8 digits.
First line. Reasons display on the second line (explained below).
The user does not have any arming privileges.
The user does not have privileges to disarm the system.
The user does not have privileges to reset the system.
The Code 2 feature must be active (enabled by any code other than Code 2) and
within a valid timeframe before the user is granted access.
A Code 2 user tried to perform a function that is not allowed by a Code 2 user.
The user does not have access to all areas.
A Normal user tried to perform a function that is not allowed by a Normal user.
The user entered a valid code, but is not allowed access at this time. Access is
limited to a specific timeframe.
The user cannot bypass the zone indicated.
37