Table of Contents
Advertisement
The first line of the LCD will show Enter
Id: The second line will display Enter The
Number followed by a scrolling menu of the
available options.
[CLR] - Start Over
Press
to start over if you make a mistake.
CLR
[ENTR] - Accept
[MUTE] - Exit menu
Press
if you want to quit before you
MUTE
finish adding this user.
2.
Enter the number of the user (not the user's
access code). For example, to select User 3,
press
.
3 ENTR
3.
The LCD will display Profile:
Enter the number of the user profile that will
control this user's access rights and press
. (User profiles are programmed by your
ENTR
installer. If you will be adding users on-site,
your installer will provide you with the profile
numbers you need.)
Technical Manuals Online! - http://www.tech-man.com
4.
The LCD will display Access Code:
Enter the user's code
Enter the 4- to 8-digit code that will give this
user access to the system, then press
5. The LCD will display Swipe/Type Card
Enter the encoded card PIN or present the card
to the card reader, then press
6.
Press
to exit when you are finished.
MUTE
Changing or Removing Users
1.
Press
+ Code (you must use the
7 ENTR
Installer code or maintenance code to perform
this function).
The first line of the LCD will show Enter
Id: The second line will display Enter The
Number followed by a scrolling menu of the
available options.
[CLR] - Start Over
Press
to start over if you make a mistake.
CLR
28
.
ENTR
.
ENTR
Advertisement
Table of Contents
