Resetting An Alarm; Silencing (Muting) A Trouble Condition; Viewing Alarm Memory - Regency 4734 Owner's Manual

Technical Manuals Online! - http://www.tech-man.com
Viewing System Information
lets you find out which zones are not ready to be
STAT
armed. If your LCD indicates "NOT READY" or
"TROUBLE" when you attempt to arm the system, press
to see the affected zones.
STAT
If you're using the area menu,
the area you are currently attempting to arm. To see
additional areas to which you have access, press
to skip to the areas you wish to view, then press
, in combination with other keys, allows you to
STAT
view other system information.
displays all the zone numbers and names in
1 STAT
the areas controlled by the touchpad you are currently
using.
displays the number and location of the
2 STAT
touchpad you are currently using.
displays the installed version of the 4734
4 STAT
software.

Resetting an Alarm

To reset an alarm in a single-area system, enter your
access code. In a multi-area system, enter your access
code, then . The alarm will stop sounding and the
0
system will disarm.

Silencing (Muting) a Trouble Condition

To silence a trouble condition alert tone, press
. The touchpad will now display
MUTE MUTE
"SILENCED" instead of "TROUBLE." If a new trouble
condition should occur in the meantime, "TROUBLE"
will again display and the alert tone will be reactivated.
In a multi-area system, enter your access code before
pressing
MUTE MUTE .
separately.

Viewing Alarm Memory

gives the status of
STAT
Each area must be silenced
24
TEST
.
STAT