Arming/Disarming Perimeter Zones; Arming/Disarming With Entry/Exit Delays - Regency 4821 User Manual

When you arm the entire system, the ARMED and
INTERIOR LEDs are on.
When you disarm the entire system, the ARMED
and INTERIOR LEDs are off and the green READY
LED is on.
X X

Arming/Disarming Perimeter Zones

If desired, you can arm only the perimeter zones,
enabling free movement throughout interior zones.
7
Toggle Method
1. Enter your code.
2. If your system is programmed to automatically
arm the interior zones when you arm the system,
you will have to press
interior zones (only the perimeter zones will
then be armed).
7
Menu Method
1. Enter a code to access the interactive menus.
Technical Manuals Online! - http://www.tech-man.com
to disarm the
INT
2. If your system is programmed to automatically
arm the interior zones when you arm the system,
press to turn off the interior zones.
INT 0
3. Press to arm or
What Happens
The ARMED LED is on and the INTERIOR LED is
off when you arm the perimeter zones.
X X

Arming/Disarming with Entry/Exit Delays

Delay times are a number of seconds allowing you to
leave or enter your building without setting off an
alarm.
What Happens
If the system has been programmed for an Exit
Delay, once you arm the system, the touchpad beeps
and the LCD begins displaying the number of
seconds before an alarm will sound. If your system
has been programmed for an Entry Delay, the
touchpad beeps and the LCD displays the number of
seconds before the system arms.
to disarm.
13