Bypassing Zones - Regency 4821 User Manual

What Happens
The LCD will return to the normal display and the
next automatic arming will be cancelled.
X X

Bypassing Zones

Bypassing a zone means temporarily turning off
protection to a point in your building. For example,
you may want to leave a door or window open
without activating alarms when the rest of your
building is armed.
You may also need to bypass a zone when you have
a Not Ready condition that cannot be immediately
corrected. (See page 36 for information about Not
Ready conditions.)
Do not bypass zones unless it is necessary. You
cannot bypass fire or other 24-hour zones.
To see what zones are already bypassed, press the
button.
BYPS
X X
Toggle Method
1. Press the number of the zone to bypass.
Technical Manuals Online! - http://www.tech-man.com
2. Press .
BYPS
3. Enter code, if necessary. (When the system is
armed, it prompts you for a code.)
X X
Menu Method
1. Enter a code to activate the interactive menus.
2. Press . You can then press
BYPS
zones are already bypassed.
3. Press to bypass a zone.
1
4. Enter the zone number and press
5. Repeat steps 3 and 4 to bypass other zones, or
press
ENTR ENTR
What Happens
Protection is turned off for the zone and the system
will not detect alarms. The LCD will display a
description and number of the bypassed zone. A
message also follows the normal display on the LCD
to remind you that a zone is bypassed.
to see which
0
.
ENTR
to exit.
15