Regency 4821 User Manual page 45

programmed to go into alarm only if two smoke
detectors in the same zone go into alarm.
disarm
Turn off your system (alarms will not sound if
someone enters the premises).
duress feature
If you are forced to disarm the system, a silent alarm
is sent to the central station when you enter a 1- or 2-
digit code along with your access code.
entry delay
A programmed number of seconds that allows you to
enter your building when the system is armed
without causing an alarm.
exit delay
A programmed number of seconds that gives you
time to exit your building once the system has been
armed.
Not Ready zones
Zones where a door or window is open. You cannot
arm the system until all zones are ready.
Technical Manuals Online! - http://www.tech-man.com
panic keys
, , and
POL FIRE AUX
to quickly send an alarm to the central station.
PIN (personal ID code)
An access code. The term PIN is more commonly
used by the access control industry.
profile
A set of features used to control access. Users are
assigned profiles to determine which features they
can access. Your installer creates and assigns
profiles through programming.
sensors
Detection devices such as smoke detectors, heat
detectors, and door contact switches.
trouble condition
A system malfunction that requires service. Contact
your installation company immediately.
zone
An area of protection. A zone can be a room, a
section of a room, or a group of rooms (interior
zones). You can protect outside entries, doors, and
windows (perimeter zones).
keys on the touchpad, used
44