Activating/Deactivating Code 2; Activating/Deactivating The Chime Feature - Regency 4821 User Manual

3. Press
BYPS .
4. Press to unbypass a zone.
2
5. Enter the zone number and press
6. Repeat Steps 4 and 5 to bypass other zones, or
press t
o exit.
ENTR
7 7

Activating/Deactivating Code 2

1. Press + code. The LCD displays
CODE 2
whether the Code 2 function is enabled or
disabled.
2. Press to disable or
0
3. Press to exit.
MUTE
Note: This feature operates the same for all systems.
What Happens
When Code 2 is enabled, temporary users (such as a
cleaning service) with a Code 2 access code can arm
or disarm your system.
Technical Manuals Online! - http://www.tech-man.com
.
ENTR
to enable Code 2.
9
X X
Activating/Deactivating the Chime
Feature
The Chime feature is used to sound a tone when
someone enters a Chime zone. For example, your
system can sound a tone whenever someone enters or
leaves the house through the back door. This is
normally used when the system is disarmed.
7
Toggle Method
To turn on the chime tones, press
To turn off the chime tones, press
7
Menu Method
1. Enter a code to activate the interactive menus.
2. Enter the area number where the zone you want
to turn on chime tones is located.
3. Press .
CHM
4. Press to exit.
ENTR
.
CHM
CHM .
25