Arming/Disarming A Specific Area; Arming/Disarming Perimeter Zones - Regency 4821 User Manual

system is armed. Flashing indicates that only some
areas are armed.
When your system is disarmed and all zones are
ready, the ARMED LED is off and the green
READY LED is on.
X X

Arming/Disarming a Specific Area

Users can arm/disarm only the areas they can access.
(Operates the same for all systems.)
1. Enter a code. When STATUS: displays on the
LCD, it indicates that you are in the interactive
menus (see page 31 for system status messages).
2. Enter the number of the area that you want to
arm or disarm.
3. Your system can be programmed to
automatically turn on the interior zones when you
arm an area. For systems not programmed this
way, press to arm the interior zones.
INT
4. Press to arm this area or
Repeat Steps 2-4 for each area you want to arm.
Technical Manuals Online! - http://www.tech-man.com
to disarm.
5. Press to exit.
ENTR ENTR
What Happens
When your system is armed, the ARMED and
INTERIOR LEDs are on. Flashing LEDs indicate
that some areas are disarmed (the area you just
armed will still be armed).
When your system is disarmed, the ARMED LED is
off and the green READY LED is on.
X X

Arming/Disarming Perimeter Zones

You can arm only the perimeter zones, enabling free
movement throughout interior zones.
X X
Toggle Method
1. Enter your code.
2. If your system is programmed to automatically
arm the interior zones when you enter your
code, press to turn off the interior zones.
INT
20