Regency 4821 User Manual page 40

All Zones Ready
Already Bypassed
Area Can Not Arm
When In Alarm!
Areas Not Ready
To Arm!
At Least 1 Zone
Not Bypassable
Bypassed
Code Required
Delay Key Locked
When Armed
Denied! Would
Cause Alarm
Technical Manuals Online! - http://www.tech-man.com
After pressing the
STAT
troubles or alarms in the system, and the system is ready to arm.
User tried to bypass a zone that is already bypassed.
You cannot arm an area that has an active alarm condition.
User attempted to arm a multi-area system where there are Not Ready areas.
The user tried to bypass a zone that cannot be bypassed.
Confirms a zone bypass. Configuring your system for automatic bypass is
recommended if you forget to unbypass zones you want protected. Contact your
installer to do this.
For security reasons, some functions require an access code.
You cannot change the exit or entry delay state when your system is armed.
Contact your installer if you would like this changed.
The user attempted to unbypass a zone from a touchpad. The zone is in a state
where an alarm would occur if it was unbypassed (such as an open window).
button, this message indicates that there are no
38