Table of Contents
Advertisement
Viewing System Status
Pressing the STAT Button
At the normal display (page 4) and main interactive
menu (page 18) only, press
The LCD either displays a message that all zones are
ready or shows the status of Not Ready zones. Also
displays active alarms and trouble conditions.
STATUS: LCD Display
If your system uses the interactive menus, the LCD
will display a STATUS: line when you enter your
code. This line will display the following messages:
Message
Description
Alarm
System is in alarm
X Alarm
Cross alarm is in progress
Armed
System is armed (on)
Arm Delay
An arming delay is in progress
Trouble
A trouble condition exists
Not Ready
System is not ready to be armed
Ready
System is ready to arm
Technical Manuals Online! - http://www.tech-man.com
.
STAT
Default LCD Display
A system status line can be displayed as part of the
message(s) that appear on your LCD when there is
no activity at the touchpads. See your installer for
programming your system for this display.
Viewing Zone Descriptions
At the normal display, press
The LCD displays each zone number on the first line
and a brief description of the zone on the second
line, then returns to the normal display.
.
1 STAT
31
Advertisement
Table of Contents
