Table of Contents
Advertisement
X X
Cancelling Auto Arm
If your system is programmed to arm automatically,
you can manually turn off this feature.
Resetting the time and date (page 29) automatically
cancels auto arming.
1. Enter code to access the interactive menus.
2. Enter the number of the area in which you want
to cancel the auto arming.
3. Press
for Set Arm Time.
1
4. Press
to erase the default number of
CLR 0
minutes (10) before auto arming goes into effect,
then press
.
ENTR
5. Repeat Steps 2-4 to cancel auto arming in other
areas, or press
ENTR
6. Press
to return to the normal display
ENTR
*Note: This feature is not available with toggle systems.
Technical Manuals Online! - http://www.tech-man.com
t
o exit.
.
What Happens
The next automatic arming of the system will be
cancelled.
X X
Bypassing Zones
Bypassing a zone means temporarily turning off
protection to a part of your building. This enables
you to access that zone and still protect the other
areas in your building. You may also need to bypass
a zone if you have a Not Ready condition that cannot
be immediately corrected. (See page 36 for
information about not ready conditions.) You
should not bypass fire or other 24-hour zones.
You can press
1 STAT
available in each area.
X X
Toggle Method
To see what zones are already bypassed, press the
button.
BYPS
1. Press the number of the zone to bypass.
2. Press
.
BYPS
to see what zones are
23
Advertisement
Table of Contents
