Unbypassing Zones - Regency 4821 User Manual

3. Enter code, if necessary. (When the system is
armed, it prompts you for a code.)
X X
Menu Method
1. Enter a code to activate the interactive menus.
2. Enter the area number where the zone you want
to bypass is located (if prompted).
3. Press You can then press
BYPS .
zones are already bypassed.
4. Press to bypass a zone.
1
5. Enter the zone # and press
6. Repeat Steps 4 and 5 to bypass other zones, or
press t
o exit.
ENTR
What Happens
Protection is turned off for the zone and the system
will not detect alarms. The LCD displays the area
and the zone bypassed. A message also follows the
normal display telling you that a zone is bypassed.
Technical Manuals Online! - http://www.tech-man.com
to see which
0
.
ENTR
X X
Un bypassing Zones
Reinstating (unbypassing) a zone means turning the
protection back on. You can press the
to see what zones are currently bypassed.
Reinstate bypassed zones as soon as possible so that
you do not accidentally leave a zone unprotected.
You cannot unbypass zones if doing so will cause an
alarm.
Note: Some systems can be programmed to
automatically reinstate any bypassed zones when the
system is disarmed.
X X
Toggle Method
1. Press the number of the zone to reinstate.
2. Press + code (if prompted).
BYPS
X X
Menu Method
1. Enter a code to activate the interactive menus.
2. Enter the area number where the zone you want
to bypass is located (if necessary).
24
button
BYPS