Unbypassing A Zone - Regency 4734 Owner's Manual

Technical Manuals Online! - http://www.tech-man.com

Unbypassing a Zone

Unbypassing a zone makes it ready once again to detect
alarms.
1. Enter the number of the zone to unbypass.
2. Press
BYPS
If the touchpad displays "RESTRICTED ZONE," you
have attempted to unbypass a fire or panic zone or a not
ready zone with an armed system. Fire and panic zones
cannot be bypassed (so there is no need to unbypass
them). Not ready zones cannot be unbypassed if doing
so would cause an alarm.
Bypassing/Unbypassing Doors
To latch doors open or to unlatch doors that have been
latched open, follow these steps.
1. Enter the ID number of the door you want to latch
or unlatch. (If the doorstation you want to
latch/unlatch is the one you're currently using, you
don't need to enter the ID number.)
2. Press
DOOR BYPS
3. Enter your user code.
.
.
23