Read Outs Of Lamp And Unit Running Time; Lamp Time 1; Lamp Time 2; Life Time - Elation Patend Light 1200 HMI Instruction Manual

3.2 Read outs of Lamp and Unit Running Time.

Select the time level by pressing the Menu key twice.
Select the requested time by pressing the Cursor key,

3.2.1 Lamp Time 1

The current lamp time is shown alternating with LA 1. This is the total hours
used in the current lamp.
This time can be cleared by pressing the Data + and Data – keys at the same
time. Usually done when adding a new lamp.

3.2.2 Lamp Time 2

The total lamp time is shown alternating with LA 2. this time can't be cleared.
This is the total hours of all lamp lives.

3.2.3 Life Time

The life time is shown alternating with LIFE. This is the total hours of usage for
the entire fixture.

3.3 The CODE Level

This level is accessed by authorized dealers only.
In this level you can adjust all functions. Also the change of Pan/Tilt high-byte and low-
byte is possible.
(V1.2)
11