Preparing The Condensed Water Container For Steam Smoothing - Miele heat pump dryer Operating Instructions Manual

Preparing the condensed wa‐
ter container for Steam
smoothing

Condensed water which has col‐
lected in the condensed water con‐
tainer is directed into the drum in the
Steam smoothing programme. The
condensed water container must
therefore be filled with water up to at
least the –min– marker.
The –min– marker is at the front left-
hand side of the container.
 Make use of the condensed water
which collects during the drying
process.
If the condensed water container is
empty
 You can fill the condensed water con‐
tainer with commercially available
condensed water (ironing water).
You should only use tap water in excep‐
tional circumstances. If tap water is
used frequently, the Steam smoothing
spray jet (in the door opening) can be‐
come calcified.
Cleaning and care
1 spout, 2 rubber seal
 Pour the water in through the rings of
the spout 1.

Only use clean water. The water
must not contain any fragrance, de‐
tergent or other substances.
Check the rubber seal from time to
time.
If tap water is used frequently, white
limescale deposits can build up on the
rubber seal 2.
 Use a damp cloth to carefully remove
any limescale deposits from the rub‐
ber seal 2.
 After cleaning the rubber seal, push
the condensed water container fully
into the dryer.
39